10 / 100Mbps 32-Port Rack mount Switch. 32 x 10 / 100Mbps NWay Ethernet ports. 1 x 10 / 100Mbps NWay MDI-II Uplink port. 1 expansion slot for 100BASE-FX fiber module. Full/half duplex transfer mode for each port. Wire speed reception and transmission. Store-and-Forward switching method. Integrated address Look-Up Engine, supports 16K absolute MAC addresses. Supports 512Kbytes RAM for data buffering. Extensive front-panel diagnostic LEDs. Broadcast storm protection. IEEE 802.3x flow control for full-duplex. Back pressure flow control for half-duplex. Supports 3 QoS levels checked IP Header and 802.1Q VLAN Tag and / or selected per port basis. Supports two trunking groups for cascading two or more Switches. Standard 19inch Rack mount design.

• Supports auto-negotiation for speed adjustment
• Supports auto-MDI/MDI-X on each port
• Wire speed reception and transmission
• Store and Forward switching method
• Integrate address search engine
• Supports 4M bits RAM for data buffering - 16 ports
• Supports 2.5M Bytes RAM for data buffering - 24 ports
• Supports 1M Bytes RAM for data buffering - 32 ports
• IEEE 802.3x flow control for full duplex
• Back pressure flow control for half duplex
• Comprehensive front panel diagnostic LEDs

• IEEE 802.3 10BASE-T
• IEEE 802.3u 100BASE-TX

• Ethernet 10Mbps Half-Duplex 20Mbps Full-Duplex
• Fast Ethernet 100Mbps Half-Duplex 200Mbps Full-Duplex

• Fast Ethernet Cat. 5 EIA/TIA-568 100-ohm STP
• Ethernet UTP Cat. 3, 4, 5 EIA/TIA-568 100-ohm STP

• Operating: 0 ~ 40° C
• Storage: -10 ~ 70° C

• 14 Watts

• Operating: 10% ~ 90% RH
• Storage: 5% ~ 90% RG

• 1M Bytes

• Per unit: Power
• Per port: Link/Activity
• Speed

• 4K per device

• 100 ~ 240V AC 50/60Hz, Internal Switching Power

• FCC Class B
• CE mark Class B
• VCCI-B

• 440 x 140 x 44mm