10 / 100Mbps Single Port Print Server, Edimax (RJ45 / BNC). Dedicated print server requires no additional supporting hardware. Compact size designed for direct attachment to printers. Support multiple protocols including TCP/IP, NetBEUI and IPX. Compatible with DOS, Windows 95 / 98 / NT / 2000 / ME / XP, NetWare, Linux and Unix. Support NetWare NDS and Bindery mode. Support TCP/IP Remote Printing, NetWare Remote Printer and UNIX LRP Printing. Support web-based enhanced management WebDESK Manager. Support LPR print driver for TCP/IP printing. Support email Printing. Easy installation with auto or manual configuration. Designed with DMA for high performance throughput. BNC or RJ-45 auto-detection. Support DHCP Server/Client function. Support Flash Memory for future upgrade. Two LEDs for easy diagnostics.

1 Port 10/100 Fast Ethernet Print Server
• Multiple Network Protocols – TCP/IP, NetBEUI and IPX
• Multiple Network Environment – Windows Peer-to-Peer, Windows Server, Netware and Linux
• Multiple Platform – Windows 95/98/Me/NT/2000, DOS, Unix and Linux
• Supports DHCP Server/Client, Auto-detection
• Supports Bi-Directional
• Fault-Tolerant Upgrade

  Description
  --------------------------------------------------------------------------------
  Easy Installation and Configuration (Web-Based)
  

• The print server's easy-to-use windows installation wizard allow for quick installation and setup. The print server can also be conveniently configured from any network client that support web-browsing.
  Supports both Peer-to-Peer and Server-based printing
  
• LAN clients can connect directly with the print server to execute printing jobs (Peer-to-Peer printing); or clients can send print jobs first to a server (queuing jobs) and allow the server to connect with the print server to execute the printing jobs (Server-based printing). Supports Windows 95/98/Me/NT/2000/XP, NetWare
  (3.x above) and Unix/Linux environments
• The print server and its drivers are compatible with all major operating systems used today
  Supports DHCP Server/Client
  
• The printer server can act as a DHCP server, allowing your LAN clients to automatically obtain an IP address or it can act as a DHCP client allowing for easy integration to your existing network Fault-Tolerant Firmware Upgrades
  
• Users need not worry about errors occurring in the midst of an upgrade, thus preventing the print server from operating. The print server's fault-tolerant upgrade function allows for re-upgrades should problems occur during the initial upgrade

  Key Features
  --------------------------------------------------------------------------------
  

• Provides one 10/100Mbps auto-sensing port that complies with IEEE 802. and 802.3u standards
• Provides one printer port that can attach directly to a printer's parallel port
• Supports TCP/IP, IPX/SPX, NetBEUI network protocols
• Supports LPR, Email Printing, Raw Printing, Unix Logical Printer
• Supports Peer-to-Peer Printing (TCP/IP/IPX/NetBEUI)
• Supports Server-based printing (Novell NetWare and Windows)
• Compatible with all major operating systems (Windows 95/98/Me/NT/2000/XP, NetWare (3.x above) and Unix/Linux)
• Supports DHCP (both client and server) protocol
• Efficient print job transfer using DMA (Direct Memory Access).
• Supports bi-directional capability, able to get information from printers
• Supports Web-based management, Windows Configuration Utility, SNMP Protocol
• Provides easy-to-use installation, setup and diagnostic programs.
• Provides flash memory for convenient software upgrades.
• Supports Fault-Tolerant Upgrade capability

  Specifications
  --------------------------------------------------------------------------------
  

• Standards : IEEE 802.3 IEEE 802.3u
• Printer Port : Centronic x 1
• LAN Port : 10/100M UTP (RJ45) x 1
• Power : 6VDC/1A
• Dimensions : 25(H) x 57(W) x 110(D) mm
• Weight : 95g
• Temperature : 10-55 °C
• Humidity : 0-90%(Non-condensing)
• Certification : FCC Class B CE Mark
  
  
  Part Number PS-1100A
  
  

  Quantity	1
  Price	$66.74

  Add this item to your cart: